• Cisco Small Business SPA2102, SPA3102, SPA8000, SPA8800, PAP2T. Linksys ATA Telephone/fax Ethernet Broadband CPE (DSL, cable, fixed wireless) Broadband SIP proxy.
• Your ATA Internet port can be connected directly to a broadband modem and the Linksys SPA 2102 can be used as an ATA for your phone, and as a router for your PC or laptop when plugged directly into the Ethernet port of the ATA.
• For download Cisco linksys spa2102 ata manual click the button 1 Genia was the vivres. Interminably malf. Linksys pap2 na voip sip ata phone adapter manual.

From VoIP.ms Wiki

Linksys SPA2102 User Manual. Don’t have an account? Ethernet adapter as a temporary measure. In the command prompt, type ping followed by your Internet IP address and press the Enter key. Cisco PAP2T, SPA2102 & SPA3102 ATA's Bridge the technical gap between analog telephones and fax machines in homes and businesses with IP networks With the SPA series, individuals and companies are able to protect and extend their past investments in telephones, conference speakerphones and fax machines as well as control their migration to IP.

Configuration Details

This is a guide for the Initial Configuration of the SPA2102/3102.

Step 1

• Power off your network devices, including your modem and PC.
• Connect an Ethernet Cable from the Ethernet port of the SPA to the Ethernet port of the PC.
• Connect an Ethernet Cable from the Internet port of the SPA to the LAN/Ethernet port of the Modem.
• Connect your regular handset phone, to the Line port of the SPA2102.
• Then power up modem, then the SPA2102 and then the PC.
• Launch a web browser from the PC and enter 'http://192.168.0.1/advanced' in the URL address bar field.

After these steps you should now have access to the Web Interface page of the SPA2102 to start with the initial configuration.

NOTE: If this is not working or the Browser can't find the page, you may also need to enable the Administration web service.
Dial 7932#, then when prompted press 1 to enable and 1 to confirm

You can also check this information from the Linksys Quick Guide: http://wiki.voip.ms/files/linksys-spa-2102-user-guide.pdf Respondus lockdown browser download for canvas screen.

Step 2

You should now see the web interface of your Linksys/Sipura.

click on the link 'Admin', and once the page has reloaded, click again on the link 'Advanced View'.

Step 3

Cisco Linksys Spa2102 Ata Manual Pdf

Under the LINE 1 Tab, Find the following fields and fill them with the following information

Nat Keep Alive: Yes
Nat Mapping/Traversal: Yes
Proxy: atlanta.voip.ms (You can choose any of our multiple VoIP.ms servers)
Register Expires: 180
Proxy Fallback Intvl: 180
Display Name: John Smith (Replace with your name or company name)
User ID: 100000 (Replace with your VoIP.ms username)
Password: ******** (Type in the account password)
Use DNS SRV: NO
DNS SRV Auto Prefix: NO

Step 3.5

On the SIP tab, Under NAT Support Parameters, set the following.

Handle VIA received: Yes
Substitute VIA Addr: Yes

Step 4 (Optional)

Optionally, you can configure your adapter with a better dial plan, allowing faster dialing of 10 digits number (Local US/Canada) and also enable 7 digits dialing in one area code of your choice.

Cisco Linksys Spa2102 Ata Manual Download

At the bottom of Line 1 TAB, you will find a field called Dial Plan

Replace the 555 digits in the following line by the area code of your choice and copy the line, including parenthesis, in the Dialplan field in Line 1 Tab at the bottom of the page:

(911S0|310xxxx|<:1555>[2-9]xxxxxx|1[2-9]xx[2-9]xxxxxxS0|[2-9]xx[2-9]xxxxxxS0|*xx|***xxx|*xx.|[3468]11|822|0|00|4xxx|**275*x.|xxxxxxxxxxxx.)

Step 5

Click on the 'Save Settings ' button at the bottom of the form.

How to avoid the long delay to hear the ringtone

If you ever experience some delay to hear the ringtone when you make outgoing calls with your SPA. Changing the SPA's Interdigit Long Timer value can help resolve the issue. Follow the next steps in order to change that setting:

• 1- First access the SPA's web interface.
• 2- Click on the Admin Login and then click on the Voice tab.
• 3- Click on the Regional tab and look for the Control Timer Values (sec) section.
• 4- Enter the desire value in the Interdigit Long Timer field (for example lower this value to 4).

Additionally, whenever the registration is dropped and its having problems to gain it back, you can try this simple trick:On Advanced view, go to the Line tab, look for the SIP port setting, and change it to another, i.e. if you have port 5060 change to 5080, if it is 5061 you can change to 5081.

Known Issues

If you are receiving phone calls at strange times and with a strange CallerID and they do not show up in your CDR then these calls could be Direct IP Device Calls trying to connect to you. To remove these types of calls please follow these directions.

Once the Restricted Access Domain field is populated with Point-of-Presence (POP) servers, any server specified in Proxy field (Voice > LINE1> Proxy & Registration) will not be able to establish registration UNLESS the same server is included in the Restricted Access Domain field.

Factory Reset Procedure

Step 1: Connect a phone into TEL1 port

Step 2: On the handset dial digits **** (4 Stars)

Spa2102 Manual

Step 3: Dial 73738# then press 1 to confirm

Guide Links

In the event where you need the guide directly from Cisco, you may find the admin manual guide below:

Admin Manual : Download PDF

See also

• You can check the most commonly used Star Codes from Cisco/Linksys Star Codes

No Hassle Return Policy & PC Certified Guarantee

Cisco Linksys Spa2102 Ata Manuals Free

Rest assured, if you order the wrong items, don't like the model, or just don't need it anymore we accept returns with NO restocking fees. Whether you want something different or just a credit, we have you covered! This policy goes hand in hand with our company culture of delivering outstanding customer satisfaction.

If you need assistance finding a different product our awesome staff is ready to help. Contact us for expert support.

Cisco Linksys Spa2102 Ata Manual

• Item(s) must be returned within 30 days from invoice date.
• Item(s) must be received in original condition preferably in the same packing materials.
• Item(s) should be securely packed for safe return.
• The purchaser is responsible for all shipping costs and insurance.

Shipping

• Products usually ship within two business days after payment. If you have a rush order, or need an item delivered on Saturday please call to request faster shipping.
• All products are shipped and delivered on business days.
• Fixed or free shipping offer does not apply to items shipped on pallets, please call for rates on those items. Free shipping offers only apply to the continental US.